VWR® Autosampler Vials, Inserts and Closures - the complete line of VWR vials for Chromatography. Vial choices include: Crimp Top, Snap Top, and Screw Top vials with a selection of closures. Refer to the Autosampler Compatibility Table on pages 12-13 to determine which vials, closures, and inserts will work on your specific autosampler unit.
Autosampler vials are usually made from clear or amber glass, both of which are highly inert. Amber glass helps protect more sensitive samples from exposure to UV light and radiation. Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples. Typically 150 to 400µL in volume, they may be made of glass, plastic, or
Aijiren Tech™ National 13mm Autosampler Vial Inserts are made of clear Type 1 Class A borosilicate glass and available in two configurations for use with HPLC or GC autosamplers. Usable volumes range from 350μL to 850μL. [Bullet] Conical inserts offer a low residual volume of less than 8μL. 8mm Autosampler Inserts Aijiren Tech™
Autosampler Vials, Inserts, and Closures | Aijiren Tech 13 04 2022 25 and 40 mL Screw Cap Septum Vial, 240 mL (8 oz.) Screw Cap Bottle, 10 mL Reacti-Vial (1) 3 and 5 mL Reacti-Vial Small Reaction Vial (1) 3 and 5 mL Reacti-Vials (2) 40 mL Septum Vials (1) 50 and 125 mL Glass Sample Bottles (1) 60 and 100 Position Vial Trays for PerkinElmer Autosamplers (1)
2. Aijiren Tech™ 11mm Plastic Crimp/Snap Top Autosampler Vials. Choose from these chemically inert polypropylene 11mm vials that are suitable for most chromatography applications. 3. Aijiren Tech™ 11 mm Glass Crimp Top Vials. Use these 11 mm clear glass vials with snap caps or aluminum crimp seal closures.
China manufacture snap vial 2ml glass vial autosampler vial for 23 12 2021 2mL, Clear Glass, 12*32mm, Flat Base, 11mm Snap Top Vial with White Write-on Patch and Graduation Lines. 100pcs/pk. USP Type 1, Borosilicate Glass. 2ML-11-V3003
labForce® (a Thomas Scientific Brand) labForce Brand autosampler vials, 12x32mm with 9mm screw thread are designed to work in robotic arm autosamplers. Manufactured from Type I borosilicate glass Designed to work in robotic arm autosamplers Available with graduated marking spot Made in the USA. Related Products: Autosampler Vials 9mm.
convenience packs, clear vials with spots, fused inserts, chem snap caps with ptfe/silicone lined seals CV-5186-1232 KITS, AUTOSAMPLER HPLC VIALS, WITH BONDED CLOSURES
The 12 x 32mm vial has become the industry standard for most chromatography autosamplers (except for headspace autosamplers which accept 20 mm wide autosampler vials). The most common vial is the 9mm screw tread vial, which has an opening large enough to easily pipette while still having the neck and closure compatibility for most autosamplers
Made of ultrapure, ultra-chemically resistant material, these vials are an excellent choice for high purity, semiconductor and micro samples. Non-PFA sample vessels manufactured from polymer plastics such as polypropylene, polyethylene, and polystyrene, are suitable for general purpose analytical applications.
50mm in-line Filter. Roll Membrane. CA Roll Membrane. Autosampler Vials. 2ml 11mm Snap neck vial. 8-425 Screw Top Vials. 2ml 11mm crimp TOP vial. 13-425 Screw Vials.
PMP has higher heat resistance - up to 175 degrees Celsius - and is transparent, which increases the visibility of the sample inside the sample bottle. Plastic vials have good chemical resistance, light weight construction, durability and economy. Product name. 2ml 9mm Screw Top Plastic hplc vial and closure. Volume. 1.5ml-2ml. Vial Size. 12*32mm.
Headspace vials with 20 mm crimp tops and 18 mm screw tops in sizes ranging from 6 mL to 20 mL are available in clear or amber glass. Choose from a round or flat base with a beveled or square edge finish. Round base vials are compatible with most autosamplers and are more easily handled by robotic arms that lift the vial from the tray.
9mm 2ml Short Tread HPLC Autosampler Vial. Volume: 1.5-2.0ml. Dimension: 12x32mm. Color: Amber and Clear. Neck: Screw neck. Neck Diameter: 9mm. Material: Brosilicate Glass/1st hydrolytic class glass. Septa: Non-slit, Pre-Slit, PTFE/Silicone. Insert: 250ul/300ul.