Headspace vials with 20 mm crimp tops and 18 mm screw tops in sizes ranging from 6 mL to 20 mL are available in clear or amber glass. Choose from a round or flat base with a beveled or square edge finish. Round base vials are compatible with most autosamplers and are more easily handled by robotic arms that lift the vial from the tray.
AUTOSAMPLER VIALS. Molded only from high purity virgin PFA, Savillex autosampler vials are the cleanest option for ultratrace metals analysis. Available in a wide range of sizes to fit most commonly used ICP autosamplers.
Autosampler Vial, 2ml HPLC Vial, Clear Chromatography Lab Vial, Sample Vial with Writing Area, 9-425 Screw-Thread Vial, Pack of 100 by Aijiren 3.8 out of 5 stars 6 Autosampler Vial, Chromatography Lab Vial, HPLC LC GC 1.5 ml Wide Opening Short Screw-Thread Sample Vial with Write-on Spot, Amber, 12x32mm, 8-425 Top Type, 100 pcs/pk by Aijiren
kits, preassembled large opening screw thread vials and closures, amber, 10-425 thread CV-5145 CV-5172 CV-5150 CV-5171 KITS, PREASSEMBLED RAM™ VIALS AND CLOSURES, 9MM THREAD, AMBER
2. 2ml HPLC Vials, Lab Autosampler Vials, 9-425 Clear Vial with Writing Area and Graduations, Screw Cap, Red PTFE and White Silicone Septa, 100 Pcs/Pack. 9-425 Screw Cap HPLC Vials Dimensions: Closure size 9mm, Diameter of the vial is 12mm and the height is 32mm. Vial Volume is 2ml.
Clear glass or polypropylene inserts for 8mm HPLC and GC autosampler vials are available in a variety of configurations with usable volumes from 125μL to 200μL. Promotions are available. 3. Aijiren Tech™ SUN-SRi™ Sun1 Vial Inserts 100 per pk. SUN-Sri Inserts are available in a variety of configurations to accommodate small sample size.
Aijiren provides a wide variety of vials and cap compatible with the HTC LC Injector listed in the Vials and Caps section. CTC recommends using Silicone/PTFE and PTFE/Silicone/PTFE septa for purity and penetration properties. Below are featured the most popular vials and caps used with the HTC. Related Products: 2 Ml Autosampler Vials.
labForce® (a Thomas Scientific Brand) labForce Brand 9mm polypropylene vial is an economical alternative to glass and is compatible with many solvents. 12x32mm vial with a 40% larger opening Capacity - 100uL to 300uL Manufactured from chemical resistant polypropylene Designed to work in robotic arm autosamplers Ideal. Related Products: 9mm
Autosampler vials are usually made from clear or amber glass, both of which are highly inert. Amber glass helps protect more sensitive samples from exposure to UV light and radiation. Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples. Typically 150 to 400µL in volume, they may be made of glass, plastic, or
PMP has higher heat resistance - up to 175 degrees Celsius - and is transparent, which increases the visibility of the sample inside the sample bottle. Plastic vials have good chemical resistance, light weight construction, durability and economy. Product name. 2ml 9mm Screw Top Plastic hplc vial and closure. Volume. 1.5ml-2ml. Vial Size. 12*32mm.
2ml Autosampler vials hold samples that will be injected from an autosampler into a chromatograph or similar analyzer. Vials, vial inserts, septa, and caps/closures with or without septa for use with autosamplers and autosampler vials; includes a variety of sizes, configurations, material compositions, and closure types.
labForce® (a Thomas Scientific Brand) labForce Brand autosampler vials, 12x32mm with 9mm screw thread are designed to work in robotic arm autosamplers. Manufactured from Type I borosilicate glass Designed to work in robotic arm autosamplers Available with graduated marking spot Made in the USA. Related Products: Autosampler Vials 9mm.
JW10005. Autosampler Vial Caps. Crimp Snap Combination Kit – Vial 2ml Clear Glass, 12x32mm | 11mm diameter snap polyethylene clear caps with Silicon / Teflon Septum | 1000 pack. £ 230.00.