Features : 2ml Clear autosampler vial,12mm Diameter,32mm Height,9-425 screw top.Our vials with caps are widely used in standard HPLC and GC applications.The vials can be used on all common autosamplers due to their technical geometry, preferentially they are found on Aijiren, HTA, Shimadzu, Thermo, Varian, Aijiren Technology, etc.
Autosampler Vials AUTOSAMPLER VIALS. Molded only from high purity virgin PFA, Savillex autosampler vials are the cleanest option for ultratrace metals analysis. Available in a wide range of sizes to fit most commonly used ICP autosamplers.
kits, preassembled large opening screw thread vials and closures, amber, 10-425 thread CV-5145 CV-5172 CV-5150 CV-5171 KITS, PREASSEMBLED RAM™ VIALS AND CLOSURES, 9MM THREAD, AMBER
Autosampler Vials and Vial Sets. Save time and reduce the risk of contamination using this convenience kit. It includes 100 clear vials pre-assembled with 100 screw thread caps and septa. Nearly eliminate septa push-through and improve sealing with vials built with the innovative Advanced Vial Closure System (AVCS).
The total-volume injection SIL-30AC autosampler features a pressure tolerance of 130 MPa as well as the world’s fastest sample injection (10 seconds), which dramatically reduces the total cycle time. It includes auto pretreatment and overlapping functions as standard, and an optional loop-injection method configuration to minimize delay volume.
Autosampler Vials. Mastelf Autosampler Vials made from borosilicate glass are the best vessels for your laboratory needs because they meet ASTM Type I Class A and USP Type I standards so your lab is more efficient by reducing costs and saving time. We provide an enormous selection of vials, caps, and accessories that are essential for your
Pricing. SU860091. black polypropylene hole cap, thread for 8-425, PTFE/rubber septum, for use with 11.6 × 32mm vial (standard opening), pkg of 100 ea. Expand. Hide. 854984. black polypropylene hole cap, thread for 8-425, PTFE/rubber septum, for use with 11.6 × 32 mm vial (standard opening), pkg of 1000 ea.
Autosampler vials are usually made from clear or amber glass, both of which are highly inert. Amber glass helps protect more sensitive samples from exposure to UV light and radiation. Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples. Typically 150 to 400µL in volume, they may be made of glass, plastic, or
151.00€. 2. Aijiren Tech™ 8mm Clear Glass Screw Thread Vials. These 8mm vials have a 8-425 thread finish. They are manufactured from high-quality glass and fit a variety of autosamplers. 19.30€ – 147.00€. Promotions are available. 3. Aijiren Tech™ 8mm Autosampler Vial Screw Thread Caps.
Sample Tubes & Vials. A number of autosamplers have been used with Aijiren AA, ICP-OES, MP-AES and ICP-MS instruments, depending on the specific model. This includes the Aijiren SPS 4 used with current instruments, and the SPS 3 or ASX 500 Series used with earlier model instruments. Each autosampler automates the presentation of liquid samples
Although not engineered specifically for radiation applications, the borosilicate autosampler glass vials should easily withstand typical laboratory sterility radiation exposure in short duration applications such as irradiating biologicals and similar without suffering structural damage.
JW10005. Autosampler Vial Caps. Crimp Snap Combination Kit – Vial 2ml Clear Glass, 12x32mm | 11mm diameter snap polyethylene clear caps with Silicon / Teflon Septum | 1000 pack. £ 230.00.
100 Pcs Membrane Solutions 2ml HPLC Vials, Autosampler Vials, 9-425 Sample Vials with Write-on Spot, Graduations, 9mm Blue ABS Screw Caps & Septa for GC Sample vials B075K58G5G $36.74 Color: Clear Vial & Red PTFE septa Features: LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass
autosampler vial closures Molded only from high purity virgin PFA, these autosampler vial closures are available both snap top and screw threaded styles. Learn More.