Vials, Plates and Seals for Alliance HPLC Systems. Screw caps form an excellent seal and mechanically hold the septum in place during piercing.
Basik™ 10mm screw top vials and inserts are made for HPLC autosamplers using first hydrolytic, TYPE-1, N51A expansion, borosilicate glass. These vials are used
These clear glass or polypropylene inserts for 8mm HPLC and GC autosampler vials are 10mm ID Screw Top Clear Glass Vial with sealed 300 µL Insert.
Does not come with caps. ND9mm Screw Thread Autosampler Clear Lab Vials are made of clear Type 1, Class A Borosilicate Glass with a writable label for sample
Our company is well-known as one of the leading 1.5ml 8-425 screw neck vial ND8 micro-inserts manufacturers and suppliers in China, specialized in providing
and 10mm Black ABS Screw Caps & Septa, Clear, Case of 100.
300 µL – 2 mL samples into HPLC vials without inserts. 12 x 32 Deactivated, Qsert™ Vial screw thread cap and LectraBond™ PTFE/silicone septa. Aijiren Technology.
Mar 22, 2020 Screw 9mm (N9) HPLC Vial, Cap, Septa and Inserts ... Classifications for laboratory glass based on its resistance to attack from water were ...
Aijiren Technology 4 mL Deactivated Amber Glass Screw Neck Vial with Cap Quick load, 700 µL deactivated glass insert for use with a 96-well plate.
1) HPLC / Autosampler Vials, Caps & Septas 8mm, 9mm, 11mm, 13mm,Vials Rack, 13mm vials have a 13-425 GPI thread and can hold up to 4ml of sample.
Precision Sampling GC111, GC 311, LC 241-60 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials, 12 x 32 mm ... Clear Plastic Vial w/100 µL Glass Insert.
Lot-tested including HPLC and GC analysis for. 9 critical parameters VWR® Standard Opening Screw Thread Vials and Inserts. Description. Glass. Patched.
15x45mm Screw Thread Vials for Aijiren Technology® WISP 48-Position Caps and septa are pre-assembled to save time during sample preparation and to minimize ...
HPLC Vials 10-425 1.5ml Screw Vials. Wide-opening vials provide an increased target area for easier sample preparation and to reduce the chance of bent or
Type I borosilicate has the least pH shift of any glass. It is highly resistant to water, neutral and acid solutions, concentrated acids and acid mixtures, and